Skip to main content

DSPACE

democratized.space

🌙 Dark mode

Processes

Buy 1 kWh of electricity from a wall outlet
Duration
5s
Requires
1 item (1)
• 1x
Consumes
1 item (0.18)
• 0.18x
Creates
2 items (1000.98)
• 1000x
• 0.98x
View details
Layer soil, cap with gravel, plant, and fill an 80 L Walstad aquarium
Duration
40m
Requires
7 items (9)
• 1x
• 1x
Consumes
4 items (6)
• 3x
• 1x
Creates
1 item (1)
• 1x
View details
Use a smart plug to buy 10 kWh of electricity from a wall outlet
Duration
5s
Requires
1 item (1)
• 1x
Consumes
1 item (1.8)
• 1.8x
Creates
2 items (10009.77)
• 10000x
• 9.77x
View details
Use a smart plug to buy 100 kWh of electricity from a wall outlet
Duration
5s
Requires
1 item (1)
• 1x
Consumes
1 item (18)
• 18x
Creates
2 items (100097.7)
• 100000x
• 97.7x
View details
Set smart plug to a 12 h on/off cycle
Duration
2m
Requires
1 item (1)
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Fill a 19 L (5 gal) bucket with chlorinated tap water from a sink
Duration
3m
Requires
1 item (1)
• 1x
Consumes
1 item (1)
• 1x
Creates
1 item (1)
• 1x
View details
3D print a 60 mm Benchy calibration model
Duration
1h 30m
Requires
1 item (1)
• 1x
Consumes
2 items (165)
• 15x
• 150x
Creates
2 items (16)
• 1x
• 15x
View details
Start a print without checking the first layer that clogs the nozzle
Duration
30m
Requires
none
Consumes
3 items (56)
• 1x
• 5x
Creates
1 item (1)
• 1x
View details
Miss Z homing and engulf the extruder in a blob of plastic
Duration
45m
Requires
none
Consumes
3 items (111)
• 1x
• 10x
Creates
1 item (1)
• 1x
View details
Disassemble and clear a clogged 3D printer nozzle
Duration
1h
Requires
3 items (3)
• 1x
• 1x
Consumes
2 items (6)
• 1x
• 5x
Creates
1 item (1)
• 1x
View details
Install a fresh 0.4 mm brass nozzle after a clog
Duration
45m
Requires
3 items (3)
• 1x
• 1x
Consumes
2 items (2)
• 1x
• 1x
Creates
1 item (1)
• 1x
View details
Remove a blob of plastic and install a new nozzle
Duration
1h 30m
Requires
2 items (2)
• 1x
• 1x
Consumes
2 items (2)
• 1x
• 1x
Creates
1 item (1)
• 1x
View details
Tension and square X- and Y-axis belts on an entry-level FDM 3D printer
Duration
25m
Requires
3 items (3)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Use a sheet of printer paper to level an entry-level FDM 3D printer bed
Duration
20m
Requires
3 items (3)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
3D print a 100 mm model rocket using 91 g of green PLA on an entry-level FDM printer
Duration
13h
Requires
1 item (1)
• 1x
Consumes
2 items (1691)
• 91x
• 1600x
Creates
1 item (1)
• 1x
View details
3D print the Completionist Award II core on a leveled printer
Duration
8h
Requires
1 item (1)
• 1x
Consumes
2 items (1350)
• 150x
• 1200x
Creates
1 item (1)
• 1x
View details
Print the engraved nameplate for the Completionist Award II
Duration
1h 30m
Requires
1 item (1)
• 1x
Consumes
2 items (280)
• 30x
• 250x
Creates
1 item (1)
• 1x
View details
Sand, glue, and press-fit the Completionist Award II core and nameplate
Duration
25m
Requires
2 items (2)
• 1x
• 1x
Consumes
4 items (2.2)
• 1x
• 1x
Creates
1 item (1)
• 1x
View details
Wipe the Completionist Award II with soap and a soft towel until streak-free
Duration
8m
Requires
3 items (3)
• 1x
• 1x
Consumes
2 items (1.1)
• 0.1x
• 1x
Creates
1 item (1)
• 1x
View details
Place the polished Completionist Award II on a dusted bookshelf with accent lighting
Duration
5m
Requires
2 items (2)
• 1x
• 1x
Consumes
1 item (1)
• 1x
Creates
1 item (1)
• 1x
View details
Re-buff the polished Completionist Award II with diluted soap and a fresh towel
Duration
5m
Requires
3 items (3)
• 1x
• 1x
Consumes
2 items (1.05)
• 0.05x
• 1x
Creates
1 item (1)
• 1x
View details
Wipe fingerprints from the displayed Completionist Award II without removing it from the shelf
Duration
4m
Requires
3 items (3)
• 1x
• 1x
Consumes
2 items (1.05)
• 0.05x
• 1x
Creates
1 item (1)
• 1x
View details
Re-position the displayed Completionist Award II for better stability and glare control
Duration
5m
Requires
2 items (2)
• 1x
• 1x
Consumes
1 item (1)
• 1x
Creates
1 item (1)
• 1x
View details
Leave a 5 gal bucket of tap water uncovered for 48h so chlorine dissipates
Duration
48h
Requires
none
Consumes
1 item (1)
• 1x
Creates
1 item (1)
• 1x
View details
Add 5 mL of water conditioner to a 5 gal bucket to neutralize chlorine
Duration
2m
Requires
2 items (2)
• 1x
• 1x
Consumes
2 items (1.1)
• 0.1x
• 1x
Creates
1 item (1)
• 1x
View details
Soak 10 hydroponic starter plugs in a 5 gallon bucket of dechlorinated tap water
Duration
30m
Requires
1 item (1)
• 1x
Consumes
1 item (10)
• 10x
Creates
1 item (10)
• 10x
View details
Germinate basil seeds in starter plugs
Duration
7d
Requires
1 item (1)
• 1x
Consumes
2 items (20)
• 10x
• 10x
Creates
1 item (10)
• 10x
View details
Prepare a hydroponics tub with water and nutrient solution
Duration
10m
Requires
none
Consumes
3 items (3)
• 1x
• 1x
Creates
1 item (1)
• 1x
View details
Drain and refill a hydroponics tub with fresh nutrient solution
Duration
15m
Requires
2 items (2)
• 1x
• 1x
Consumes
3 items (2.1)
• 1x
• 1x
Creates
1 item (1)
• 1x
View details
Clone a mint cutting in a soaked starter plug
Duration
5m
Requires
2 items (2)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Grow 10 basil seedlings under a hydroponic lamp for four weeks until harvest-ready
Duration
28d
Requires
1 item (1)
• 1x
Consumes
3 items (24203)
• 10x
• 1x
Creates
2 items (11)
• 10x
• 1x
View details
Regrow 10 harvested basil plants in a ready hydroponics tub using 8,064 dWatts
Duration
14d
Requires
none
Consumes
3 items (8075)
• 10x
• 1x
Creates
2 items (11)
• 10x
• 1x
View details
Harvest your hydroponic basil plants
Duration
5m
Requires
none
Consumes
1 item (10)
• 10x
Creates
2 items (20)
• 10x
• 10x
View details
Germinate stevia seeds in starter plugs
Duration
7d
Requires
1 item (1)
• 1x
Consumes
2 items (20)
• 10x
• 10x
Creates
1 item (10)
• 10x
View details
Grow six stevia seedlings in a hydroponics tub under a 36 W lamp for four weeks
Duration
28d
Requires
1 item (1)
• 1x
Consumes
3 items (16135)
• 6x
• 1x
Creates
2 items (7)
• 6x
• 1x
View details
Regrow harvested stevia plants in a hydroponic tub
Duration
14d
Requires
none
Consumes
3 items (8075)
• 10x
• 1x
Creates
2 items (11)
• 10x
• 1x
View details
Trim a hydroponic stevia plant and collect 10 leaves
Duration
3m
Requires
none
Consumes
1 item (1)
• 1x
Creates
2 items (11)
• 10x
• 1x
View details
Steep 10 stevia leaves in hot water for 1h to make stevia extract
Duration
1h
Requires
none
Consumes
1 item (10)
• 10x
Creates
1 item (1)
• 1x
View details
Polish dried stevia crystal lot into final crystals
Duration
6h
Requires
1 item (1)
• 1x
Consumes
1 item (1)
• 1x
Creates
1 item (1)
• 1x
View details
Prepare a 1% stevia solution in rinsed glassware for tasting
Duration
10m
Requires
5 items (5)
• 1x
• 1x
Consumes
1 item (0.05)
• 0.05x
Creates
1 item (1)
• 1x
View details
Blind taste the stevia solution and log sweetness, onset, and aftertaste
Duration
6m
Requires
2 items (2)
• 1x
• 1x
Consumes
1 item (1)
• 1x
Creates
1 item (1)
• 1x
View details
find your sink
Duration
10s
Requires
none
Consumes
none
Creates
1 item (1)
• 1x
View details
3D Print a rocket body tube
Duration
2h 8m 11s
Requires
none
Consumes
3 items (286.15000000000003)
• 1x
• 18.48x
Creates
3 items (20.48)
• 1x
• 1x
View details
3D print a rocket nosecone coupler
Duration
54m 12s
Requires
none
Consumes
3 items (120.24000000000001)
• 1x
• 6.32x
Creates
3 items (8.32)
• 1x
• 1x
View details
3D print a rocket nosecone
Duration
1h 47m 15s
Requires
none
Consumes
3 items (238.3375)
• 1x
• 13.9x
Creates
3 items (15.9)
• 1x
• 1x
View details
3D print a rocket fincan
Duration
8h 3m 13s
Requires
none
Consumes
3 items (1060.00139)
• 1x
• 52.3x
Creates
3 items (54.3)
• 1x
• 1x
View details
3D print a servo-ready fincan
Duration
8h 45m
Requires
none
Consumes
3 items (1184.4)
• 1x
• 58.4x
Creates
3 items (60.4)
• 1x
• 1x
View details
3D print a guidance avionics sled
Duration
3h 20m
Requires
none
Consumes
3 items (445.8)
• 1x
• 24.8x
Creates
3 items (26.8)
• 1x
• 1x
View details
Mask a rocket body tube with masking tape for painting
Duration
3m
Requires
1 item (1)
• 1x
Consumes
1 item (0.1)
• 0.1x
Creates
1 item (1)
• 1x
View details
Assemble your rocket
Duration
5m
Requires
none
Consumes
7 items (6.1)
• 1x
• 1x
Creates
1 item (1)
• 1x
View details
Launch your rocket!
Duration
30s
Requires
3 items (3)
• 1x
• 1x
Consumes
2 items (2)
• 1x
• 1x
Creates
2 items (2)
• 1x
• 1x
View details
Glue cracked fins on a damaged model rocket using superglue
Duration
10m
Requires
none
Consumes
2 items (1.05)
• 1x
• 0.05x
Creates
1 item (1)
• 1x
View details
Launch a model rocket with parachute recovery
Duration
45s
Requires
3 items (3)
• 1x
• 1x
Consumes
2 items (2)
• 1x
• 1x
Creates
2 items (2)
• 1x
• 1x
View details
Simulate a guided model rocket hop
Duration
12m
Requires
2 items (2)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Assemble the guided flight stack
Duration
35m
Requires
none
Consumes
5 items (4.2)
• 1x
• 1x
Creates
1 item (1)
• 1x
View details
Upload and tune stability firmware
Duration
20m
Requires
none
Consumes
1 item (1)
• 1x
Creates
2 items (2)
• 1x
• 1x
View details
Install the nosecone camera module
Duration
25m
Requires
1 item (1)
• 1x
Consumes
2 items (1.1)
• 1x
• 0.1x
Creates
1 item (1)
• 1x
View details
Complete the guided launch pad checks
Duration
8m
Requires
5 items (5)
• 1x
• 1x
Consumes
1 item (1)
• 1x
Creates
2 items (2)
• 1x
• 1x
View details
Walk through the guided countdown
Duration
2m
Requires
2 items (2)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Launch a guided model rocket hop
Duration
1m
Requires
5 items (5)
• 1x
• 1x
Consumes
3 items (3)
• 1x
• 1x
Creates
5 items (5)
• 1x
• 1x
View details
Install a parachute system on a model rocket
Duration
60s
Requires
none
Consumes
5 items (5)
• 1x
• 1x
Creates
1 item (1)
• 1x
View details
Add a 200 Wh battery pack, charge controller, and 200 W solar panel to an outdoor watertight enclosure
Duration
5m
Requires
none
Consumes
4 items (4)
• 1x
• 1x
Creates
1 item (1)
• 1x
View details
Wire a 200 W portable panel, 30 A controller, and 200 Wh LiFePO4 pack with fused 8 AWG ring leads
Duration
10m
Requires
none
Consumes
4 items (4)
• 1x
• 1x
Creates
1 item (1)
• 1x
View details
Disassemble a 200 Wh solar enclosure
Duration
1m
Requires
none
Consumes
1 item (1)
• 1x
Creates
4 items (4)
• 1x
• 1x
View details
Add a 1 kWh battery, charge controller, and 200 W solar panel to an outdoor watertight enclosure
Duration
5m
Requires
none
Consumes
4 items (4)
• 1x
• 1x
Creates
1 item (1)
• 1x
View details
Disassemble a 1 kWh solar enclosure
Duration
1m
Requires
none
Consumes
1 item (1)
• 1x
Creates
4 items (4)
• 1x
• 1x
View details
Configure a 30 A solar charge controller for LiFePO4 and record the profile
Duration
5m
Requires
1 item (1)
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Generate 200 Wh of electricity using solar
Duration
1h
Requires
1 item (1)
• 1x
Consumes
none
Creates
2 items (400)
• 200x
• 200x
View details
Generate 200 Wh of electricity using a one-axis solar tracker
Duration
1h
Requires
1 item (1)
• 1x
Consumes
none
Creates
2 items (400)
• 200x
• 200x
View details
Assemble a one-axis solar tracking unit with aluminum extrusions, dual steppers, and an Arduino control kit
Duration
45m
Requires
none
Consumes
4 items (4)
• 1x
• 1x
Creates
1 item (1)
• 1x
View details
Harvest 200 Wh from a wired 200 W portable kit into a LiFePO4 battery
Duration
1h
Requires
1 item (1)
• 1x
Consumes
none
Creates
2 items (400)
• 200x
• 200x
View details
Mount and fuse a 300 W pure sine inverter within 30 cm of a 200 Wh pack
Duration
10m
Requires
none
Consumes
3 items (3)
• 1x
• 1x
Creates
1 item (1)
• 1x
View details
Load test a mounted 300 W inverter with a 150 W AC appliance and verify voltage sag
Duration
15m
Requires
2 items (2)
• 1x
• 1x
Consumes
1 item (150)
• 150x
Creates
1 item (1)
• 1x
View details
Top up a smartphone from the wired 200 W portable kit over USB-C
Duration
45m
Requires
3 items (3)
• 1x
• 1x
Consumes
1 item (10)
• 10x
Creates
1 item (1)
• 1x
View details
Generate 1000 Wh of electricity using solar
Duration
5h
Requires
1 item (1)
• 1x
Consumes
none
Creates
2 items (2000)
• 1000x
• 1000x
View details
Prepare a 150 L aquarium
Duration
2h
Requires
none
Consumes
7 items (26)
• 1x
• 1x
Creates
2 items (2)
• 1x
• 1x
View details
Rinse floating plants in dechlorinated water to shake off algae, snails, and eggs
Duration
8m
Requires
4 items (4)
• 1x
• 1x
Consumes
2 items (2)
• 1x
• 1x
Creates
1 item (1)
• 1x
View details
Spread rinsed floating plants under the light without blocking the filter intake
Duration
5m
Requires
2 items (2)
• 1x
• 1x
Consumes
1 item (1)
• 1x
Creates
1 item (1)
• 1x
View details
Add a goldfish to your aquarium
Duration
10m
Requires
1 item (1)
• 1x
Consumes
2 items (2)
• 1x
• 1x
Creates
1 item (1)
• 1x
View details
Feed your goldfish
Duration
8h
Requires
1 item (1)
• 1x
Consumes
1 item (0.1)
• 0.1x
Creates
1 item (1)
• 1x
View details
Install a heater in your Walstad tank
Duration
5m
Requires
none
Consumes
2 items (2)
• 1x
• 1x
Creates
1 item (1)
• 1x
View details
Add guppies to your heated Walstad tank
Duration
1m
Requires
none
Consumes
2 items (2)
• 1x
• 1x
Creates
1 item (1)
• 1x
View details
Pack floating plants into dense cover so guppy fry can hide from adults
Duration
20m
Requires
3 items (3)
• 1x
• 1x
Consumes
2 items (2)
• 1x
• 1x
Creates
1 item (1)
• 1x
View details
Crush flake food into a fine powder for guppy fry
Duration
5m
Requires
1 item (1)
• 1x
Consumes
1 item (0.5)
• 0.5x
Creates
1 item (1)
• 1x
View details
Feed guppy fry daily under dense plant cover until they reach juvenile size
Duration
14d
Requires
4 items (4)
• 1x
• 1x
Consumes
1 item (1)
• 1x
Creates
1 item (1)
• 1x
View details
dCarbon to dOffset
Duration
5s
Requires
none
Consumes
2 items (11)
• 1x
• 10x
Creates
1 item (1)
• 1x
View details
dCarbon to dOffset
Duration
5s
Requires
none
Consumes
2 items (110)
• 10x
• 100x
Creates
1 item (10)
• 10x
View details
basic income
Duration
1d
Requires
none
Consumes
none
Creates
2 items (200)
• 100x
• 100x
View details
Deposit 10 dUSD into savings jar
Duration
5s
Requires
1 item (1)
• 1x
Consumes
1 item (10)
• 10x
Creates
1 item (1)
• 1x
View details
Break savings jar and retrieve all dUSD
Duration
5s
Requires
1 item (1)
• 1x
Consumes
1 item (1)
• 1x
Creates
1 item (1)
• 1x
View details
Charge your Hypercar
Duration
2h
Requires
1 item (1)
• 1x
Consumes
2 items (32401)
• 1x
• 32400x
Creates
1 item (1)
• 1x
View details
Use a laptop to flash Raspberry Pi OS onto a 64 GB microSD card
Duration
10m
Requires
1 item (1)
• 1x
Consumes
1 item (1)
• 1x
Creates
1 item (1)
• 1x
View details
Clone OS to M.2 SSD
Duration
10m
Requires
none
Consumes
2 items (2)
• 1x
• 1x
Creates
1 item (1)
• 1x
View details
Assemble a Pi cluster node
Duration
5m
Requires
none
Consumes
4 items (4)
• 1x
• 1x
Creates
1 item (1)
• 1x
View details
Create a GitHub repository fork for DSPACE
Duration
5m
Requires
1 item (1)
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Add a GitHub Actions CI workflow
Duration
5m
Requires
1 item (1)
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Clone DSPACE (git clone ...), cd dspace, and run pnpm install
Duration
15m
Requires
2 items (2)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Run npm run qa:smoke, npm run test:ci, then capture a local test report artifact
Duration
25m
Requires
2 items (2)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Launch DSPACE with Docker Compose
Duration
1m
Requires
1 item (1)
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Create a Cloudflare Tunnel to port 3002
Duration
5m
Requires
2 items (2)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Rinse hydroponic grow media to clear salts
Duration
8m
Requires
2 items (2)
• 1x
• 1x
Consumes
1 item (1)
• 1x
Creates
1 item (1)
• 1x
View details
Stage ten dechlorinated buckets for a hydro push
Duration
15m
Requires
1 item (10)
• 10x
Consumes
none
Creates
1 item (1)
• 1x
View details
Present ten-bucket haul to dChat for the Hydro Award
Duration
1m
Requires
1 item (1)
• 1x
Consumes
1 item (1)
• 1x
Creates
1 item (1)
• 1x
View details
Join nodes to a k3s cluster
Duration
5m
Requires
1 item (1)
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Install Prometheus and Grafana
Duration
10m
Requires
1 item (1)
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Configure daily backups to SSD
Duration
5m
Requires
2 items (2)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Assemble a basic telescope
Duration
5m
Requires
5 items (5)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Measure hydroponic nutrient solution pH with a test strip
Duration
2m
Requires
4 items (4)
• 1x
• 1x
Consumes
1 item (1)
• 1x
Creates
1 item (1)
• 1x
View details
Mix a dilute peroxide rinse for hydro gear
Duration
3m
Requires
5 items (5)
• 1x
• 1x
Consumes
2 items (1.02)
• 1x
• 0.02x
Creates
1 item (1)
• 1x
View details
Scrub and peroxide-rinse hydroponic net cups
Duration
6m
Requires
2 items (2)
• 1x
• 1x
Consumes
1 item (1)
• 1x
Creates
1 item (1)
• 1x
View details
Air-dry sanitized net cups on a rack
Duration
10m
Requires
1 item (1)
• 1x
Consumes
1 item (1)
• 1x
Creates
1 item (1)
• 1x
View details
Soak a porous air stone in dechlorinated water
Duration
10m
Requires
2 items (2)
• 1x
• 1x
Consumes
1 item (0.5)
• 0.5x
Creates
1 item (1)
• 1x
View details
Test soak an air stone with a pump and airline
Duration
2m
Requires
3 items (3)
• 1x
• 1x
Consumes
1 item (1)
• 1x
Creates
1 item (1)
• 1x
View details
Measure hydroponic nutrient EC
Duration
1m
Requires
2 items (2)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Check a 12 V battery pack's voltage with a digital multimeter
Duration
5m
Requires
3 items (3)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Measure a portable solar panel's short-circuit current in direct sun
Duration
3m
Requires
2 items (2)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Measure a portable solar panel's open-circuit voltage in direct sun
Duration
2m
Requires
2 items (2)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Measure a 220 Ω resistor with a digital multimeter
Duration
1m
Requires
3 items (3)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Identify LED anode and cathode using a multimeter's diode mode
Duration
2m
Requires
3 items (3)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Assemble an LED indicator module on a breadboard
Duration
5m
Requires
4 items (6)
• 1x
• 1x
Consumes
3 items (5)
• 1x
• 1x
Creates
1 item (1)
• 1x
View details
Measure a photoresistor's resistance using a digital multimeter
Duration
2m
Requires
3 items (3)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Calibrate a digital multimeter using a 220 Ω reference resistor
Duration
3m
Requires
2 items (2)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Clip an anti-static wrist strap to ground before handling electronics
Duration
1m
Requires
1 item (1)
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Measure hydroponic nutrient solution EC with a handheld meter
Duration
1m
Requires
2 items (2)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Calibrate EC meter with 1000 ppm solution
Duration
2m
Requires
2 items (2)
• 1x
• 1x
Consumes
1 item (1)
• 1x
Creates
1 item (1)
• 1x
View details
Adjust solution pH
Duration
5m
Requires
5 items (5)
• 1x
• 1x
Consumes
2 items (0.1)
• 0.05x
• 0.05x
Creates
1 item (1)
• 1x
View details
Log a stable 5.5–6.5 pH reading for the reservoir
Duration
1m
Requires
2 items (2)
• 1x
• 1x
Consumes
1 item (1)
• 1x
Creates
1 item (1)
• 1x
View details
Wash your hands with soap and running water
Duration
1m
Requires
1 item (1)
• 1x
Consumes
2 items (2)
• 1x
• 1x
Creates
1 item (1)
• 1x
View details
Dry your hands with a paper towel
Duration
30s
Requires
1 item (1)
• 1x
Consumes
1 item (1)
• 1x
Creates
1 item (1)
• 1x
View details
Pack a basic first aid kit
Duration
2m
Requires
none
Consumes
4 items (4)
• 1x
• 1x
Creates
1 item (1)
• 1x
View details
Wash and bandage a minor cut
Duration
5m
Requires
2 items (2)
• 1x
• 1x
Consumes
5 items (5)
• 1x
• 1x
Creates
1 item (1)
• 1x
View details
Practice 30:2 CPR on a training manikin
Duration
20m
Requires
4 items (4)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Observe Jupiter's four Galilean moons through a basic telescope
Duration
20m
Requires
2 items (2)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Check aurora forecast and pick a dark-sky window
Duration
10m
Requires
2 items (2)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Pack red light and layers for aurora watching
Duration
5m
Requires
2 items (2)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Record aurora sighting in your mission logbook
Duration
15m
Requires
3 items (3)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Use a satellite-tracking app to find the next ISS pass
Duration
5m
Requires
2 items (2)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Set up a safe ISS spotting station
Duration
10m
Requires
4 items (4)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Log the ISS flyover in your mission logbook
Duration
10m
Requires
3 items (3)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Archive an incomplete ISS pass entry before a fresh retry
Duration
2m
Requires
1 item (1)
• 1x
Consumes
1 item (1)
• 1x
Creates
1 item (1)
• 1x
View details
Draft a seasonal star hop plan in your logbook
Duration
15m
Requires
3 items (3)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Level a tripod, polar align, and lock a camera for star trail stacking
Duration
10m
Requires
4 items (4)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Shoot and stack long exposures into a finished star trail photo
Duration
45m
Requires
2 items (2)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Identify constellations with a star chart
Duration
30m
Requires
2 items (2)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Trace Big Dipper pointers to Polaris and note azimuth
Duration
15m
Requires
5 items (5)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Pick a Venus observing window
Duration
10m
Requires
3 items (3)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Sketch Venus's phase through a basic telescope
Duration
20m
Requires
3 items (3)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Clear an out-of-range Venus sketch before corrective retest
Duration
2m
Requires
1 item (1)
• 1x
Consumes
1 item (1)
• 1x
Creates
1 item (1)
• 1x
View details
Watch a meteor shower with your telescope
Duration
1h
Requires
1 item (1)
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Photograph a lunar eclipse with a telescope
Duration
45m
Requires
3 items (3)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Install the Arduino IDE
Duration
10m
Requires
1 item (1)
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Upload and run the Servo Sweep example on an Arduino Uno
Duration
10m
Requires
5 items (7)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Mount a servo to a breadboard clamp, wire it to an Arduino Uno, and strain-relieve the jumper wires
Duration
20m
Requires
8 items (11)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Upload a sweep sketch, verify travel limits, and capture a baseline servo log
Duration
10m
Requires
3 items (3)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Log temperature from a thermistor using an Arduino Uno
Duration
15m
Requires
6 items (8)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Plot logged temperature data using Python and Matplotlib
Duration
10m
Requires
1 item (1)
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Wire an Arduino Uno with a thermistor voltage divider and serial logging sketch
Duration
20m
Requires
7 items (10)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Run the thermistor logger for a day and export readings to CSV while the rig keeps rolling
Duration
60m
Requires
2 items (2)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Smooth and annotate temperature logs before sharing
Duration
15m
Requires
2 items (2)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Serve a live temperature JSON endpoint on the local network without burning the rig
Duration
20m
Requires
3 items (3)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Host an auto-refreshing web chart powered by your live temperature JSON endpoint
Duration
15m
Requires
3 items (3)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Upload the Blink sketch to an Arduino Uno and flash a 5 mm LED on a breadboard
Duration
10m
Requires
7 items (8)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Dim an LED with a potentiometer on Arduino
Duration
10m
Requires
8 items (10)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Log Arduino temperature data on a Raspberry Pi
Duration
15m
Requires
3 items (3)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Install pyserial on a Raspberry Pi
Duration
2m
Requires
1 item (1)
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Drip acclimate dwarf shrimp to your aquarium
Duration
1h
Requires
4 items (4)
• 1x
• 1x
Consumes
1 item (1)
• 1x
Creates
1 item (1)
• 1x
View details
Net drip-acclimated shrimp into the Walstad aquarium
Duration
10m
Requires
3 items (3)
• 1x
• 1x
Consumes
2 items (2)
• 1x
• 1x
Creates
1 item (1)
• 1x
View details
Add unacclimated shrimp directly to the Walstad aquarium
Duration
5m
Requires
2 items (2)
• 1x
• 1x
Consumes
2 items (2)
• 1x
• 1x
Creates
1 item (1)
• 1x
View details
Net out shrimp carcasses and run a corrective water change
Duration
45m
Requires
4 items (4)
• 1x
• 1x
Consumes
2 items (2)
• 1x
• 1x
Creates
2 items (2)
• 1x
• 1x
View details
Rinse sponge filter in a bucket of dechlorinated water to preserve beneficial bacteria
Duration
10m
Requires
3 items (3)
• 1x
• 1x
Consumes
1 item (1)
• 1x
Creates
1 item (1)
• 1x
View details
Reassemble and restart a sponge filter after rinsing the media
Duration
5m
Requires
3 items (3)
• 1x
• 1x
Consumes
1 item (1)
• 1x
Creates
1 item (1)
• 1x
View details
Use gravel vacuum with 2 m hose and 19 L (5 gal) bucket to change 5% of water in 150 L aquarium
Duration
30m
Requires
4 items (4)
• 1x
• 1x
Consumes
1 item (0.25)
• 0.25x
Creates
1 item (1)
• 1x
View details
3D print a 20 mm calibration cube on an entry-level FDM 3D printer using 15 g of green PLA filament
Duration
1h
Requires
1 item (1)
• 1x
Consumes
1 item (15)
• 15x
Creates
1 item (1)
• 1x
View details
Measure 20 mm calibration cube with digital calipers; log dimensions in mission logbook using quill
Duration
5m
Requires
3 items (3)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Install green PLA filament on an entry-level FDM printer and purge 10 g
Duration
15m
Requires
3 items (3)
• 1x
• 1x
Consumes
1 item (10)
• 10x
Creates
1 item (1)
• 1x
View details
Print a Benchy while stepping retraction to reduce stringing
Duration
2h
Requires
3 items (3)
• 1x
• 1x
Consumes
2 items (220)
• 20x
• 200x
Creates
2 items (21)
• 1x
• 20x
View details
Print and label a white PLA temperature tower
Duration
3h
Requires
2 items (2)
• 1x
• 1x
Consumes
2 items (270)
• 30x
• 240x
Creates
2 items (31)
• 1x
• 30x
View details
Swap to white PLA filament on an entry-level FDM 3D printer
Duration
15m
Requires
3 items (3)
• 1x
• 1x
Consumes
1 item (10)
• 10x
Creates
1 item (1)
• 1x
View details
3D print a 60 mm Benchy calibration boat on an entry-level FDM printer with 15 g white PLA
Duration
1h 30m
Requires
1 item (1)
• 1x
Consumes
1 item (15)
• 15x
Creates
1 item (1)
• 1x
View details
Use a soldering iron kit to join a 5 mm LED and a 220 Ω resistor with two jumper wires
Duration
15m
Requires
1 item (1)
• 1x
Consumes
3 items (4)
• 1x
• 1x
Creates
1 item (1)
• 1x
View details
Strip 5 mm of insulation from a jumper wire
Duration
30s
Requires
3 items (3)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Join two jumper wires using a soldering iron kit, flux pen, helping hands tool, and safety goggles
Duration
10m
Requires
6 items (7)
• 1x
• 1x
Consumes
1 item (5)
• 5x
Creates
1 item (1)
• 1x
View details
Confirm a 220 Ω resistor's value using a printed color code chart
Duration
2m
Requires
2 items (2)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
3D print a smartphone stand on an entry-level FDM 3D printer using 20 g of white PLA filament
Duration
2h
Requires
1 item (1)
• 1x
Consumes
1 item (20)
• 20x
Creates
1 item (1)
• 1x
View details
3D print a set of four PLA cable clips on an entry-level FDM 3D printer
Duration
1h 10m
Requires
2 items (2)
• 1x
• 1x
Consumes
2 items (132)
• 12x
• 120x
Creates
1 item (1)
• 1x
View details
3D print a filament spool holder base and arms using white PLA on an entry-level FDM printer
Duration
4h
Requires
2 items (2)
• 1x
• 1x
Consumes
2 items (640)
• 120x
• 520x
Creates
1 item (1)
• 1x
View details
3D print a generator housing on an entry-level FDM printer using 40 g of white PLA filament
Duration
4h
Requires
1 item (1)
• 1x
Consumes
1 item (40)
• 40x
Creates
1 item (1)
• 1x
View details
3D print a crank handle on an entry-level FDM printer using 20 g of white PLA filament
Duration
2h
Requires
1 item (1)
• 1x
Consumes
1 item (20)
• 20x
Creates
1 item (1)
• 1x
View details
Bolt a 12 V DC motor into a printed housing, add the crank handle, and terminate to a fused lead kit
Duration
25m
Requires
5 items (5)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Write a mission log entry with a feather quill and black ink
Duration
5m
Requires
2 items (2)
• 1x
• 1x
Consumes
1 item (0.05)
• 0.05x
Creates
1 item (1)
• 1x
View details
Photograph the Completionist Award II and log its serial in the mission logbook
Duration
10m
Requires
3 items (3)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Set a weekly calendar reminder on your phone for the quest board
Duration
2m
Requires
1 item (1)
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Dip a pH strip into your freshwater aquarium and match the color to the chart
Duration
3m
Requires
2 items (2)
• 1x
• 1x
Consumes
1 item (1)
• 1x
Creates
1 item (1)
• 1x
View details
Log an aquarium pH strip result with date and time
Duration
5m
Requires
3 items (3)
• 1x
• 1x
Consumes
1 item (1)
• 1x
Creates
1 item (1)
• 1x
View details
Dry aquarium glass with a paper towel and attach a strip thermometer
Duration
2m
Requires
3 items (3)
• 1x
• 1x
Consumes
2 items (2)
• 1x
• 1x
Creates
1 item (1)
• 1x
View details
Check aquarium water temperature with an attached strip thermometer
Duration
30s
Requires
2 items (2)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Note the Walstad tank temperature from the attached strip thermometer
Duration
30s
Requires
1 item (1)
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Log a heated Walstad tank temperature reading
Duration
30s
Requires
1 item (1)
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Log a freshly changed Walstad tank temperature reading
Duration
30s
Requires
1 item (1)
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Dry hydroponic reservoir wall with a paper towel and mount a strip thermometer
Duration
2m
Requires
3 items (3)
• 1x
• 1x
Consumes
2 items (2)
• 1x
• 1x
Creates
1 item (1)
• 1x
View details
Log hydroponic reservoir temperature from the mounted strip thermometer
Duration
30s
Requires
1 item (1)
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Run ammonia, nitrite, nitrate, and pH tests with a liquid kit and clean vials
Duration
15m
Requires
2 items (2)
• 1x
• 1x
Consumes
1 item (0.05)
• 0.05x
Creates
1 item (1)
• 1x
View details
Record aquarium water parameters in a logbook using a liquid test kit
Duration
8m
Requires
4 items (4)
• 1x
• 1x
Consumes
1 item (1)
• 1x
Creates
1 item (1)
• 1x
View details
Use gloves, gauze, and antiseptic from a first aid kit to control a minor nosebleed
Duration
10m
Requires
1 item (1)
• 1x
Consumes
3 items (3)
• 1x
• 1x
Creates
1 item (1)
• 1x
View details
Generate 50 Wh with a hand crank generator
Duration
10m
Requires
3 items (3)
• 1x
• 1x
Consumes
none
Creates
1 item (50)
• 50x
View details
Fully charge a smartphone from a 200 Wh battery pack using a USB cable
Duration
1h
Requires
3 items (3)
• 1x
• 1x
Consumes
1 item (10)
• 10x
Creates
1 item (1)
• 1x
View details
Charge a 200 Wh battery pack in direct sun using a 200 W solar panel and charge controller
Duration
1h
Requires
3 items (3)
• 1x
• 1x
Consumes
none
Creates
2 items (400)
• 200x
• 200x
View details
Verify USB cable continuity with a digital multimeter
Duration
2m
Requires
3 items (3)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Anchor a 500 W wind turbine mast, wire it to a charge controller, and confirm brake function
Duration
1h
Requires
7 items (7)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Charge a 200 Wh battery pack with a 500 W wind turbine
Duration
30m
Requires
2 items (2)
• 1x
• 1x
Consumes
none
Creates
2 items (400)
• 200x
• 200x
View details
Cut pine panels for a simple birdhouse
Duration
35m
Requires
3 items (3)
• 1x
• 1x
Consumes
1 item (1)
• 1x
Creates
1 item (1)
• 1x
View details
Glue and nail the birdhouse shell
Duration
45m
Requires
3 items (3)
• 1x
• 1x
Consumes
2 items (2)
• 1x
• 1x
Creates
1 item (1)
• 1x
View details
Sand, roof, and finish the birdhouse
Duration
30m
Requires
2 items (2)
• 1x
• 1x
Consumes
2 items (2)
• 1x
• 1x
Creates
1 item (1)
• 1x
View details
Cut and glue a pine planter box for balcony gardening
Duration
8h
Requires
2 items (2)
• 1x
• 1x
Consumes
3 items (6)
• 4x
• 1x
Creates
1 item (1)
• 1x
View details
Vent and layer a kitchen compost bucket
Duration
15m
Requires
2 items (2)
• 1x
• 1x
Consumes
2 items (3)
• 2x
• 1x
Creates
1 item (1)
• 1x
View details
Measure the 5 V pin on an Arduino Uno using a digital multimeter
Duration
5m
Requires
4 items (4)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Aerate and mix a layered compost bucket
Duration
10m
Requires
3 items (3)
• 1x
• 1x
Consumes
1 item (1)
• 1x
Creates
1 item (1)
• 1x
View details
Check core temperature of a compost pile with a compost thermometer
Duration
2m
Requires
2 items (2)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Re-check compost temperature after moisture adjustment
Duration
2m
Requires
4 items (4)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Gauge compost moisture with a probe meter
Duration
2m
Requires
2 items (2)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Let a hot compost bucket cool and cure
Duration
3d
Requires
3 items (3)
• 1x
• 1x
Consumes
1 item (1)
• 1x
Creates
1 item (1)
• 1x
View details
Screen finished compost into a fine blend
Duration
10m
Requires
3 items (3)
• 1x
• 1x
Consumes
1 item (1)
• 1x
Creates
1 item (1)
• 1x
View details
Heat the soldering iron and melt solder on the tip while wearing safety goggles
Duration
2m
Requires
3 items (3)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Wipe the soldering iron tip on a damp sponge to remove oxidation
Duration
1m
Requires
2 items (2)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Measure a red flashlight's 9 V battery with a digital multimeter
Duration
2m
Requires
3 items (3)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Heat a through-hole joint and clear it with a spring-loaded pump while wearing safety goggles
Duration
5m
Requires
3 items (3)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Remove solder from a PCB pad with solder wick and a soldering iron
Duration
5m
Requires
5 items (5)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Bolt a micro servo to a base and attach its plastic horn as an arm with a precision screwdriver set
Duration
10m
Requires
2 items (2)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Assemble a two-servo arm and gripper kit with a precision screwdriver set
Duration
30m
Requires
4 items (5)
• 1x
• 2x
Consumes
none
Creates
1 item (1)
• 1x
View details
Upload a smooth motion sketch and tune limits on a two-servo arm
Duration
20m
Requires
6 items (9)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Stack two servos into a pan-tilt bracket, mount an ultrasonic sensor, and tidy wiring to an Arduino
Duration
25m
Requires
10 items (16)
• 2x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Sweep a pan-tilt ultrasonic rig through 180° and record a point map
Duration
15m
Requires
3 items (3)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Solder a 220 Ω SMD resistor onto a PCB using a flux pen and precision tweezers
Duration
5m
Requires
6 items (6)
• 1x
• 1x
Consumes
1 item (1)
• 1x
Creates
1 item (1)
• 1x
View details
Run a controlled static rocket engine burn on a secured stand and log thrust curve data
Duration
6m
Requires
1 item (1)
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Test a GFCI outlet's wiring with a plug-in tester and its test/reset buttons
Duration
3m
Requires
1 item (1)
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Place a heat-resistant silicone mat on the workbench before powering the soldering iron
Duration
1m
Requires
2 items (2)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Place a solder fume extractor near the workspace and switch it on before soldering
Duration
1m
Requires
2 items (2)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Generate an ed25519 SSH key pair on a laptop and copy it to a Pi cluster node
Duration
2m
Requires
2 items (2)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Disable password login and root SSH access, then restart sshd
Duration
3m
Requires
1 item (1)
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Use a laptop to install UFW on a Pi node and allow only SSH and HTTPS
Duration
5m
Requires
2 items (2)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Enable unattended-upgrades with a weekly reboot window on a Pi cluster node
Duration
8m
Requires
2 items (2)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Trigger an unattended-upgrades dry run and record the log summary
Duration
5m
Requires
2 items (2)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Request and install dual RSA/ECDSA certbot certificates on the Pi cluster
Duration
7m
Requires
2 items (2)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Run an HTTPS health check and log renewal status on the cluster
Duration
6m
Requires
2 items (2)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Measure 1.75 mm PLA filament at three points with digital calipers
Duration
2m
Requires
2 items (2)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Clean soldering iron tip using a brass wire sponge
Duration
1m
Requires
2 items (2)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Trim excess leads from a soldered 220 Ω resistor using wire cutters
Duration
2m
Requires
2 items (2)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Replace the 9 V battery in a model rocket launch controller
Duration
1m
Requires
1 item (1)
• 1x
Consumes
1 item (1)
• 1x
Creates
1 item (1)
• 1x
View details
Run pwd, ls -la, grep, awk, and sed examples and save the output to commands-output.txt
Duration
4m
Requires
1 item (1)
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Summarize command patterns from the transcript into a reusable shell cheatsheet
Duration
5m
Requires
1 item (1)
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Capture top -b -n 1, free -h, and df -h output from your Ubuntu laptop
Duration
4m
Requires
1 item (1)
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Collect the same resource metrics from a dedicated Raspberry Pi colony node and compare baselines
Duration
6m
Requires
3 items (3)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Export the last 200 journal lines for a target systemd service into a report file
Duration
5m
Requires
1 item (1)
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Tail the latest system log lines into an incident extract and annotate suspicious events
Duration
5m
Requires
1 item (1)
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Germinate lettuce seeds in soaked starter plugs
Duration
7d
Requires
1 item (1)
• 1x
Consumes
2 items (20)
• 10x
• 10x
Creates
1 item (10)
• 10x
View details
Grow 10 lettuce seedlings hydroponically until harvestable
Duration
21d
Requires
1 item (1)
• 1x
Consumes
3 items (18155)
• 10x
• 1x
Creates
2 items (11)
• 10x
• 1x
View details
Harvest mature lettuce heads from your hydroponic bed
Duration
10m
Requires
none
Consumes
1 item (10)
• 10x
Creates
1 item (10)
• 10x
View details
Install a submersible pump and route return tubing in a hydroponic reservoir
Duration
8m
Requires
3 items (3)
• 1x
• 1x
Consumes
3 items (3)
• 1x
• 1x
Creates
1 item (1)
• 1x
View details
Run and verify hydroponic pump circulation flow
Duration
15m
Requires
1 item (1)
• 1x
Consumes
1 item (1)
• 1x
Creates
1 item (1)
• 1x
View details
Run a controlled fizz reaction and collect disposal-ready sample
Duration
15m
Requires
4 items (4)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Log reaction observations and disposal notes
Duration
5m
Requires
2 items (2)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Calibrate floor-versus-line reflectance thresholds
Duration
20m
Requires
2 items (2)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Validate reflectance thresholds during motion
Duration
20m
Requires
2 items (2)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Assemble and level a pine step stool
Duration
2h
Requires
3 items (3)
• 1x
• 1x
Consumes
2 items (3)
• 2x
• 1x
Creates
1 item (1)
• 1x
View details
Assemble and square a compact pine bookshelf
Duration
3h
Requires
3 items (3)
• 1x
• 1x
Consumes
2 items (5)
• 4x
• 1x
Creates
1 item (1)
• 1x
View details
Build a leveled pine coffee table
Duration
4h
Requires
3 items (3)
• 1x
• 1x
Consumes
2 items (7)
• 6x
• 1x
Creates
1 item (1)
• 1x
View details
Assemble and level a simple workbench
Duration
4h
Requires
2 items (2)
• 1x
• 1x
Consumes
2 items (5)
• 4x
• 1x
Creates
1 item (1)
• 1x
View details
Cut and mount a wooden tool rack
Duration
90m
Requires
2 items (2)
• 1x
• 1x
Consumes
3 items (3)
• 1x
• 1x
Creates
1 item (1)
• 1x
View details
Craft and sand a wooden picture frame
Duration
75m
Requires
1 item (1)
• 1x
Consumes
3 items (3)
• 1x
• 1x
Creates
1 item (1)
• 1x
View details
Measure chemistry sample pH and capture a reading card
Duration
3m
Requires
4 items (4)
• 1x
• 1x
Consumes
1 item (1)
• 1x
Creates
1 item (1)
• 1x
View details
Capture and archive an ISS long-exposure memento photo
Duration
12m
Requires
3 items (3)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Dilute hydrochloric acid into a labeled working solution
Duration
12m
Requires
6 items (6)
• 1x
• 1x
Consumes
1 item (0.05)
• 0.05x
Creates
1 item (1)
• 1x
View details
Build and pressure-test a small-scale biogas digester
Duration
2d
Requires
1 item (1)
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Neutralize an acid spill and package residue for disposal
Duration
10m
Requires
5 items (5)
• 1x
• 1x
Consumes
2 items (1.02)
• 0.02x
• 1x
Creates
1 item (1)
• 1x
View details
Run a biogas digestion batch to methane output
Duration
21d
Requires
1 item (1)
• 1x
Consumes
none
Creates
1 item (80)
• 80x
View details
Prepare a buffer solution batch from diluted acid/base components
Duration
12m
Requires
4 items (4)
• 1x
• 1x
Consumes
2 items (1.01)
• 1x
• 0.01x
Creates
1 item (1)
• 1x
View details
Install aquarium LED fixture and run first photoperiod cycle
Duration
1d
Requires
2 items (2)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Adjust buffer solution to target pH and relabel the batch
Duration
8m
Requires
5 items (5)
• 1x
• 1x
Consumes
4 items (2.02)
• 1x
• 0.01x
Creates
2 items (2)
• 1x
• 1x
View details
Assemble and align a line-follower robot chassis
Duration
3h
Requires
1 item (2)
• 2x
Consumes
none
Creates
1 item (1)
• 1x
View details
Run the precipitation reaction and capture slurry evidence
Duration
10m
Requires
5 items (5)
• 1x
• 1x
Consumes
1 item (1)
• 1x
Creates
1 item (1)
• 1x
View details
Integrate ultrasonic obstacle avoidance on a mobile robot
Duration
2h
Requires
1 item (1)
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Assemble and calibrate a pan-tilt servo mount
Duration
2h
Requires
1 item (2)
• 2x
Consumes
none
Creates
1 item (1)
• 1x
View details
Assemble and calibrate a servo gripper
Duration
2h
Requires
1 item (1)
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Filter and collect precipitate with disposal-ready labels
Duration
8m
Requires
3 items (3)
• 1x
• 1x
Consumes
1 item (1)
• 1x
Creates
1 item (1)
• 1x
View details
Install and calibrate wheel encoders
Duration
2h
Requires
3 items (4)
• 2x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Stage safe reaction bench and document equipment readiness
Duration
5m
Requires
4 items (4)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Dose safe reaction reagents into staged portions
Duration
6m
Requires
2 items (2)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Calibrate pH strip kit against reference standards
Duration
7m
Requires
3 items (3)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Condition aliquot for stable pH measurement
Duration
4m
Requires
1 item (1)
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Calculate acid dilution worksheet and transfer targets
Duration
5m
Requires
2 items (2)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Pre-chill dilution flask in ice bath
Duration
6m
Requires
2 items (2)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Deploy absorbent berm around acid spill zone
Duration
4m
Requires
3 items (3)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Package neutralized residue into sealed disposal drum
Duration
5m
Requires
1 item (1)
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Calculate buffer formulation with Henderson-Hasselbalch ratio
Duration
8m
Requires
1 item (1)
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Compound initial buffer stock from measured reagents
Duration
10m
Requires
2 items (2)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Plan dropwise pH adjustment titration path
Duration
6m
Requires
1 item (1)
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Execute logged pH adjustment cycles
Duration
9m
Requires
2 items (2)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Prepare stoichiometric reagent set for precipitation
Duration
7m
Requires
2 items (2)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Age and wash precipitate cake after filtration
Duration
8m
Requires
2 items (2)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Dry and mill stevia leaves into extraction feedstock
Duration
25m
Requires
1 item (1)
• 1x
Consumes
1 item (0.3)
• 0.3x
Creates
1 item (1)
• 1x
View details
Run warm ethanol-water solvent wash on stevia feedstock
Duration
35m
Requires
2 items (2)
• 1x
• 1x
Consumes
1 item (1)
• 1x
Creates
1 item (1)
• 1x
View details
Seed concentrated stevia extract for controlled crystallization
Duration
45m
Requires
1 item (1)
• 1x
Consumes
1 item (1)
• 1x
Creates
1 item (1)
• 1x
View details
Dry seeded crystal slurry into stable crystal lot
Duration
40m
Requires
1 item (1)
• 1x
Consumes
1 item (1)
• 1x
Creates
1 item (1)
• 1x
View details
Calibrate stevia tasting panel and coded cup set
Duration
12m
Requires
2 items (2)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Run blinded sensory panel and capture structured scorecard
Duration
20m
Requires
2 items (2)
• 1x
• 1x
Consumes
none
Creates
1 item (1)
• 1x
View details
Print the Completionist Award III structural module kit (crest shell, tray, planter ring)
Duration
11h
Requires
1 item (1)
• 1x
Consumes
2 items (2360)
• 260x
• 2100x
Creates
1 item (1)
• 1x
View details
Measure, cut, sand, and oil-finish the Completionist Award III pine pedestal
Duration
1h 20m
Requires
2 items (2)
• 1x
• 1x
Consumes
3 items (1.5)
• 1x
• 0.2x
Creates
1 item (1)
• 1x
View details
Solder, heat-shrink, and continuity-test the Completionist Award III LED control harness
Duration
45m
Requires
3 items (3)
• 1x
• 1x
Consumes
2 items (40.2)
• 0.2x
• 40x
Creates
1 item (1)
• 1x
View details
Mount and debug the servo motion core for the Completionist Award III crest
Duration
55m
Requires
4 items (4)
• 1x
• 1x
Consumes
3 items (27)
• 1x
• 1x
Creates
1 item (1)
• 1x
View details
Install and prime the hydroponic planter crown on the Completionist Award III
Duration
20m
Requires
3 items (3)
• 1x
• 1x
Consumes
3 items (3)
• 1x
• 1x
Creates
1 item (1)
• 1x
View details
Final assembly, wiring validation, and calibration for the Completionist Award III
Duration
1h 10m
Requires
3 items (3)
• 1x
• 1x
Consumes
3 items (2.2)
• 1x
• 1x
Creates
1 item (1)
• 1x
View details